Sauna Bath Wooden Room

framing studs. Insulate room with standard fiberglass insulation,run wiring for  sauna light and heater and you are ready to install a custom sauna rooom.

Commercial custom sauna are manufactured for hotels, health clubs, resorts,  Defence and more.
Commercial grade sauna heaters are used for years of sauna enjoyment,
whether used dry or with sprinkling water on sauna heater rocks for steam.

There are many choices of options for custom saunas. The main wood type choices  are white Canadin Hemlock or Western Red Cedar.
Sauna heaters are electric, Electric sauna heaters are the most convenient,  just turn on and wait about 30 minutes to heat room.

Custom Sauna bench layouts can be tailored for maximum comfort or
more seating capacity. A 18" 20" or 24" deep sauna bench allows the sauna user to lay down for maximum relaxation. Or for more seating capacity,  install 3 tiers of 18" deep benches with a ceiling height of at least 7'' 6".

Custom Sauna doors are made to standard sizes or to fit an existing rough  opening. Sauna door options are: choice of wood type, insulated glass units  and choice of door handle styles.

We are among the distinguished names in the industry for manufacturing and exporting Sauna Bath. The offered bath is regarded for its exceptional design. This bath is ideal for households and hotels. It provides an impeccable bathing experience and is effective in relieving stress. Steam bath freshens up body tissues and removes toxins and wastes. It has earned us loads of profits.

Features:

• Effective in relaxing body
• Removes toxins
• Stylish appearance

Specifications:

• Door shall be FGD 2'0"x6' 8" of vertical grain Douglas Fir or Western Hemlock rails and clear hermetically sealed, double glass, tempered (16"x60") with casing, jamb, and threshold wood
• Door Hardware shall be (3) 4"x 4" butt hinges, Ives ball catch MP347B3. (2) Wooden door pulls 080
• Vents shall be (2) 4"x 10" louvered V10 for upper wall placement and lower wall placement. RO = 3¾"x9¾"
• Ceiling shall be 7' 0" from finished floor to ceiling joists (16" center)
• Walls and Ceiling shall be 1/2"x 4" select, certified, kiln-dried (moisture content not exceeding 11%To 15) T&;G, v joint, clear, 1/2"x 4" vertical grain Douglas Fir, clear 1/2"x 4" Western Red Cedar, or clear 1/2"x 4" V.G. Western Hemlock. All boards shall be blind nailed with 5p galvanized, hot dipped nails.
• Benches shall be clear S4S kiln-dried 2"x 2" tops with ½" spacing and 2"x 4" facing; glued and fastened with exposed nails